TEFLON Transparent Tube

1.Bear high low temperature 2.Security and insulation 3.Incombustibility 4.Hight insulate 5.Special size can be customize

Company introduction 

Our company is one of the most reputed manufacturer in Jiangsu ,specializing in fluorine plastic products’ researching and producting,which is located in Wuxi and 55 minutes road to shnaghai,China.We make a wide variety of  extruded plastic tube including FEP, PFA, PTFE tube and other products related. Besides, clients’ order  as well.  

The products we made have gained ISO 9001:2000 certification and ROSH approval with many advantages like : excellent high and low temperture resistance , noncombustible , good tensile strength and so on .They are widely used in aerospace, apparatus, medical treatment ,electronics ,telecom ,petro-chemical, metallurgy electrical powder, home electronics, and decoration illumination.  

In recenet years ,we have achieved good results on domestic trade ,and has achieved a certain fame in the plastic industry.With strong technical strength and the capacity of self-development production ,we have established long partner relationship with Asian clients.For example, Kanken Techno Co.,Ltd. in Japan.We hope to cooperate with you ,offering excellent products with reasonable price,and quality service. 

PTFE/F4 TUBE

usage 

wire insulation sheathingcorrosive liquidmedium pipelinethe use of various high-frequency electrical insulation and other parts

characteristic

1. high and low temperature and the use temperature of 250°c

2. has a good mechanical toughness, even if the temperature dropped to -196°c, can also keep 5% of elongation rate

3. Corrosion resistance, most of the chemicals and solvents, shown intertia, capability strong acid strong base water and variousorganic solvents.

4. Resistance strong acid, alkali, chemical eagents, oil.

5. climate resistance, plastics have the best aging.

6. high lubrication is the solid material in the lowest coefficient of friction.

7. no adhesion is the solid material in the smallest surface tension, adhesion is not any substance.

Main properties:

Properties	Unit	Result
Apparent density	g/cm	2.10—2.30
Tensile strength(min)	Mpa	20
Ulimate elongation(min)	%	200
Residual Lubricant Content(max)	%	0.5

Specifications:

specifications	Outside diameter(mm)		Wall thickness		Length>=(mm)
	nominal	tolerance	nominal	tolerance
24*2 25*2 29*2 29.6*2	24 25 29 29.6	+0.65 -0.65	2	+0.30 -0.30	4000
32*2 32*3.5 40*2 40*4 50*4 50*5	32 32 40 40 50 50	-0.80 -0.80	3.5	+-0.38
			2	+-0.30
			4	+-0.38
			5
51*2 52*4 64*2.5 64*4.5 81*2.5 82*2.582*3	51 52 64 64 81 82 82	+0.95 -0.95	2	+-0.30
			4 2.5 4.5 2.5 2.5 3	+-0.38
90*3 90*5 104*3	90 90 104	+1.10 -1.10	3 5 3	+-0.30
129*3.5 154*4 204*4	129 154 204	+1.20 -1.20	3.5 5 3	+-0.35

    

Package like this 

TEFLON Transparent Tube